Chapter 2. A Quick Tour of Lojban Grammar, With Diagrams

The picture for chapter 2

2.1. The concept of the bridi

This chapter gives diagrammed examples of basic Lojban sentence structures. The most general pattern is covered first, followed by successive variations on the basic components of the Lojban sentence. There are many more capabilities not covered in this chapter, but covered in detail in later chapters, so this chapter is a quick tour of the material later covered more slowly throughout the book. It also introduces most of the Lojban words used to discuss Lojban grammar.

Let us consider John and Sam and three statements about them:

Example 2.1. 

John is the father of Sam.


Example 2.2. 

John hits Sam.


Example 2.3. 

John is taller than Sam.


These examples all describe relationships between John and Sam. However, in English, we use the noun father to describe a static relationship in Example 2.1, the verb hits to describe an active relationship in Example 2.2, and the adjective taller to describe an attributive relationship in Example 2.3. In Lojban we make no such grammatical distinctions; these three sentences, when expressed in Lojban, are structurally identical. The same part of speech is used to represent the relationship. In formal logic this whole structure is called a predication; in Lojban it is called a bridi, and the central part of speech is the selbri. Logicians refer to the things thus related as arguments, while Lojbanists call them sumti. These Lojban terms will be used for the rest of the book.

bridi (predicate) ______________|__________________ | | John is the father of Sam |____| |______________| |___| | | | sumti selbri sumti (argument)

In a relationship, there are a definite number of things being related. In English, for example, give has three places: the donor, the recipient and the gift. For example:

Example 2.4. 

John gives Sam the book.


and

Example 2.5. 

Sam gives John the book.


mean two different things because the relative positions of John and Sam have been switched. Further,

Example 2.6. 

The book gives John Sam.


seems strange to us merely because the places are being filled by unorthodox arguments. The relationship expressed by give has not changed.

In Lojban, each selbri has a specified number and type of arguments, known collectively as its place structure. The simplest kind of selbri consists of a single root word, called a gismu, and the definition in a dictionary gives the place structure explicitly. The primary task of constructing a Lojban sentence, after choosing the relationship itself, is deciding what you will use to fill in the sumti places.

This book uses the Lojban terms bridi, sumti, and selbri, because it is best to come to understand them independently of the English associations of the corresponding words, which are only roughly similar in meaning anyhow.

The Lojban examples in this chapter (but not in the rest of the book) use boldface (as well as the usual italics) for selbri, to help you to tell them apart.

2.2. Pronunciation

Detailed pronunciation and spelling rules are given in Chapter 3, but what follows will keep the reader from going too far astray while digesting this chapter.

Lojban has six recognized vowels: a, e, i, o, u and y. The first five are roughly pronounced as a as in father, e as in let, i as in machine, o as in dome and u as in flute. y is pronounced as the sound called schwa, that is, as the unstressed a as in about or around.

Twelve consonants in Lojban are pronounced more or less as their counterparts are in English: b, d, f, k, l, m, n, p, r, t, v and z. The letter c, on the other hand is pronounced as the sh in hush, while j is its voiced counterpart, the sound of the s in pleasure. g is always pronounced as it is in gift, never as in giant. s is as in sell, never as in rose. The sound of x is not found in English in normal words. It is found as ch in Scottish loch, as j in Spanish junta, and as ch in German Bach; it also appears in the English interjection yecchh!. It gets easier to say as you practice it. The letter r can be trilled, but doesn't have to be.

The Lojban diphthongs ai, ei, oi, and au are pronounced much as in the English words sigh, say, boy, and how. Other Lojban diphthongs begin with an i pronounced like English y (for example, io is pronounced yo) or else with a u pronounced like English w (for example, ua is pronounced wa).

Lojban also has three semi-letters: the period, the comma and the apostrophe. The period represents a glottal stop or a pause; it is a required stoppage of the flow of air in the speech stream. The apostrophe sounds just like the English letter h. Unlike a regular consonant, it is not found at the beginning or end of a word, nor is it found adjacent to a consonant; it is only found between two vowels. The comma has no sound associated with it, and is used to separate syllables that might ordinarily run together. It is not used in this chapter.

Stress falls on the next to the last syllable of all words, unless that vowel is y, which is never stressed; in such words the third-to-last syllable is stressed. If a word only has one syllable, then that syllable is not stressed.

All Lojban words are pronounced as they are spelled: there are no silent letters.

2.3. Words that can act as sumti

Here is a short table of single words used as sumti. This table provides examples only, not the entire set of such words, which may be found in Section 7.16.

mi

I/me, we/us

do

you

ti

this, these

ta

that, those

tu

that far away, those far away

zo'e

unspecified value (used when a sumti is unimportant or obvious)

Lojban sumti are not specific as to number (singular or plural), nor gender (masculine/feminine/neutral). Such distinctions can be optionally added by methods that are beyond the scope of this chapter.

The cmavo ti, ta, and tu refer to whatever the speaker is pointing at, and should not be used to refer to things that cannot in principle be pointed at.

Names may also be used as sumti, provided they are preceded with the word la:

la meris. the one/ones named Mary
la djan. the one/ones named John

Other Lojban spelling versions are possible for names from other languages, and there are restrictions on which letters may appear in Lojban names: see Section 6.12 for more information.

2.4. Some words used to indicate selbri relations

Here is a short table of some words used as Lojban selbri in this chapter:

vecnu x1 (seller) sells x2 (goods) to x3 (buyer) for x4 (price)
tavla x1 (talker) talks to x2 (audience) about x3 (topic) in language x4
sutra x1 (agent) is fast at doing x2 (action)
blari'o x1 (object/light source) is blue-green
melbi x1 (object/idea) is beautiful to x2 (observer) by standard x3
cutci x1 is a shoe/boot for x2 (foot) made of x3 (material)
bajra x1 runs on x2 (surface) using x3 (limbs) in manner x4 (gait)
klama x1 goes/comes to x2 (destination) from x3 (origin point) via x4 (route) using x5 (means of transportation)
pluka x1 pleases/is pleasing to x2 (experiencer) under conditions x3
gerku x1 is a dog of breed x2
kurji x1 takes care of x2
kanro x1 is healthy by standard x2
stali x1 stays/remains with x2
zarci x1 is a market/store/shop selling x2 (products) operated by x3 (storekeeper)

Each selbri (relation) has a specific rule that defines the role of each sumti in the bridi, based on its position. In the table above, that order was expressed by labeling the sumti positions as x1, x2, x3, x4, and x5.

Like the table in Section 2.3, this table is far from complete: in fact, no complete table can exist, because Lojban allows new words to be created (in specified ways) whenever a speaker or writer finds the existing supply of words inadequate. This notion is a basic difference between Lojban (and some other languages such as German and Chinese) and English; in English, most people are very leery of using words that aren't in the dictionary. Lojbanists are encouraged to invent new words; doing so is a major way of participating in the development of the language. Chapter 4 explains how to make new words, and Chapter 12 explains how to give them appropriate meanings.

2.5. Some simple Lojban bridi

Let's look at a simple Lojban bridi. The place structure of the gismu tavla is

Example 2.7. 

x1 talks to x2 about x3 in language x4


where the x es with following numbers represent the various arguments that could be inserted at the given positions in the English sentence. For example:

Example 2.8. 

John talks to Sam about engineering in Lojban.


has John in the x1 place, Sam in the x2 place, engineering in the x3 place, and Lojban in the x4 place, and could be paraphrased:

Example 2.9. 

Talking is going on, with speaker John and listener Sam and subject matter engineering and language Lojban.


The Lojban bridi corresponding to Example 2.7 will have the form

Example 2.10. 

x1

[cu]

tavla

x2

x3

x4


The word cu serves as a separator between any preceding sumti and the selbri. It can often be omitted, as in the following examples.

Example 2.11. 

mi

tavla

do

zo'e

zo'e

I talk to you about something in some language.


Example 2.12. 

do

tavla

mi

ta

zo'e

You talk to me about that thing in a language.


Example 2.13. 

mi

tavla

zo'e

tu

ti

I talk to someone about that thing yonder in this language.


(Example 2.13 is a bit unusual, as there is no easy way to point to a language; one might point to a copy of this book, and hope the meaning gets across!)

When there are one or more occurrences of the cmavo zo'e at the end of a bridi, they may be omitted, a process called ellipsis. Example 2.11 and Example 2.12 may be expressed thus:

Example 2.14. 

mi

tavla

do

I talk to you (about something in some language).


Example 2.15. 

do

tavla

mi

ta

You talk to me about that thing (in some language).


Note that Example 2.13 is not subject to ellipsis by this direct method, as the zo'e in it is not at the end of the bridi.

2.6. Variant bridi structure

Consider the sentence

Example 2.16. 

mi

[cu]

vecnu

ti

ta

zo'e

seller-x1

-

sells

goods-sold-x2

buyer-x3

price-x4

I

-

sell

this

to that

for some price.

I sell this-thing/these-things to that-buyer/those-buyers.

(the price is obvious or unimportant)


Example 2.16 has one sumti (the x1) before the selbri. It is also possible to put more than one sumti before the selbri, without changing the order of sumti:

Example 2.17. 

mi

ti

[cu]

vecnu

ta

seller-x1

goods-sold-x2

-

sells

buyer-x3

I

this

-

sell

to that.

(translates as stilted or poetic English)

I this thing do sell to that buyer.


Example 2.18. 

mi

ti

ta

[cu]

vecnu

seller-x1

goods-sold-x2

buyer-x3

-

sells

I

this

to that

-

sell

(translates as stilted or poetic English)

I this thing to that buyer do sell.


Example 2.16 through Example 2.18 mean the same thing. Usually, placing more than one sumti before the selbri is done for style or for emphasis on the sumti that are out-of-place from their normal position. (Native speakers of languages other than English may prefer such orders.)

If there are no sumti before the selbri, then it is understood that the x1 sumti value is equivalent to zo'e; i.e. unimportant or obvious, and therefore not given. Any sumti after the selbri start counting from x2.

Example 2.19. 

ta

[cu]

melbi

object/idea-x1

-

is-beautiful

(to someone by some standard)

That/Those

-

is/are beautiful.

That is beautiful.

Those are beautiful.


when the x1 is omitted, becomes:

Example 2.20. 

melbi

unspecified-x1

is-beautiful

to someone by some standard

Beautiful!

It's beautiful!


Omitting the x1 adds emphasis to the selbri relation, which has become first in the sentence. This kind of sentence is termed an observative, because it is often used when someone first observes or takes note of the relationship, and wishes to quickly communicate it to someone else. Commonly understood English observatives include Smoke! upon seeing smoke or smelling the odor, or Car! to a person crossing the street who might be in danger. Any Lojban selbri can be used as an observative if no sumti appear before the selbri.

The word cu does not occur in an observative; cu is a separator, and there must be a sumti before the selbri that needs to be kept separate for cu to be used. With no sumti preceding the selbri, cu is not permitted. Short words like cu which serve grammatical functions are called cmavo in Lojban.

2.7. Varying the order of sumti

For one reason or another you may want to change the order, placing one particular sumti at the front of the bridi. The cmavo se, when placed before the last word of the selbri, will switch the meanings of the first and second sumti places. So

Example 2.21. 

mi

tavla

do

ti

I talk to you about this.


has the same meaning as

Example 2.22. 

do

se tavla

mi

ti

You are talked to by me about this.


The cmavo te, when used in the same location, switches the meanings of the first and the third sumti places.

Example 2.23. 

mi

tavla

do

ti

I talk to you about this.


has the same meaning as

Example 2.24. 

ti

te tavla

do

mi

This is talked about to you by me.


Note that only the first and third sumti have switched places; the second sumti has remained in the second place.

The cmavo ve and xe switch the first and fourth sumti places, and the first and fifth sumti places, respectively. These changes in the order of places are known as conversions, and the se, te, ve, and xe cmavo are said to convert the selbri.

More than one of these operators may be used on a given selbri at one time, and in such a case they are evaluated from left to right. However, in practice they are used one at a time, as there are better tools for complex manipulation of the sumti places. See Section 9.4 for details.

The effect is similar to what in English is called the passive voice. In Lojban, the converted selbri has a new place structure that is renumbered to reflect the place reversal, thus having effects when such a conversion is used in combination with other constructs such as le selbri [ku] (see Section 2.10).

2.8. The basic structure of longer utterances

People don't always say just one sentence. Lojban has a specific structure for talk or writing that is longer than one sentence. The entirety of a given speech event or written text is called an utterance. The sentences (usually, but not always, bridi) in an utterance are separated by the cmavo ni'o and i. These correspond to a brief pause (or nothing at all) in spoken English, and the various punctuation marks like period, question mark, and exclamation mark in written English. These separators prevent the sumti at the beginning of the next sentence from being mistaken for a trailing sumti of the previous sentence.

The cmavo ni'o separates paragraphs (covering different topics of discussion). In a long text or utterance, the topical structure of the text may be indicated by multiple ni'o s, with perhaps ni'oni'oni'o used to indicate a chapter, ni'oni'o to indicate a section, and a single ni'o to indicate a subtopic corresponding to a single English paragraph.

The cmavo i separates sentences. It is sometimes compounded with words that modify the exact meaning (the semantics) of the sentence in the context of the utterance. (The cmavo xu, discussed in Section 2.15, is one such word – it turns the sentence from a statement to a question about truth.) When more than one person is talking, a new speaker will usually omit the i even though she/he may be continuing on the same topic.

It is still O.K. for a new speaker to say the i before continuing; indeed, it is encouraged for maximum clarity (since it is possible that the second speaker might merely be adding words onto the end of the first speaker's sentence). A good translation for i is the and used in run-on sentences when people are talking informally: I did this, and then I did that, and ..., and ....

2.9. tanru

When two gismu are adjacent, the first one modifies the second, and the selbri takes its place structure from the rightmost word. Such combinations of gismu are called tanru. For example,

Example 2.25. 

sutra tavla


has the place structure

Example 2.26. 

x1 is a fast type-of talker to x2 about x3 in language x4

x1 talks fast to x2 about x3 in language x4


When three or more gismu are in a row, the first modifies the second, and that combined meaning modifies the third, and that combined meaning modifies the fourth, and so on. For example

Example 2.27. 

sutra tavla cutci


has the place structure

Example 2.28. 

s1 is a fast-talker type of shoe worn by s2 of material s3


That is, it is a shoe that is worn by a fast talker rather than a shoe that is fast and is also worn by a talker.

Note especially the use of type-of as a mechanism for connecting the English translations of the two or more gismu; this convention helps the learner understand each tanru in its context. Creative interpretations are also possible, however:

Example 2.29. 

bajra cutci
runner shoe

most probably refers to shoes suitable for runners, but might be interpreted in some imaginative instances as shoes that run (by themselves?). In general, however, the meaning of a tanru is determined by the literal meaning of its components, and not by any connotations or figurative meanings. Thus

Example 2.30. 

sutra tavla
fast talker

would not necessarily imply any trickery or deception, unlike the English idiom, and a

Example 2.31. 

jikca toldi
social butterfly

must always be an insect with large brightly-colored wings, of the family Lepidoptera.

The place structure of a tanru is always that of the final component of the tanru. Thus, the following has the place structure of klama:

Example 2.32. 

mi

[cu]

sutra klama

la meris.

I

-

quickly-go

to Mary.


With the conversion se klama as the final component of the tanru, the place structure of the entire selbri is that of se klama: the x1 place is the destination, and the x2 place is the one who goes:

Example 2.33. 

mi

[cu]

sutra

se klama

la meris.

I

-

quickly

am-gone-to

by Mary.


The following example shows that there is more to conversion than merely switching places, though:

Example 2.34. 

la tam.

[cu]

melbi tavla

la meris.

Tom

-

beautifully-talks

to Mary.

Tom

-

is a beautiful-talker

to Mary.


has the place structure of tavla, but note the two distinct interpretations.

Now, using conversion, we can modify the place structure order:

Example 2.35. 

la meris.

[cu]

melbi se tavla

la tam.

Mary

-

is beautifully-talked-to

by Tom.

Mary

-

is a beautiful-audience

for Tom.


and we see that the modification has been changed so as to focus on Mary's role in the bridi relationship, leading to a different set of possible interpretations.

Note that there is no place structure change if the modifying term is converted, and so less drastic variation in possible meanings:

Example 2.36. 

la tam.

[cu]

tavla melbi

la meris.

Tom

-

is talkerly-beautiful

to Mary.


Example 2.37. 

la tam.

[cu]

se tavla melbi

la meris.

Tom

-

is audiencely-beautiful

to Mary.


and we see that the manner in which Tom is seen as beautiful by Mary changes, but Tom is still the one perceived as beautiful, and Mary, the observer of beauty.

2.10. Description sumti

Often we wish to talk about things other than the speaker, the listener and things we can point to. Let's say I want to talk about a talker other than mi. What I want to talk about would naturally fit into the first place of tavla. Lojban, it turns out, has an operator that pulls this first place out of a selbri and converts it to a sumti called a description sumti. The description sumti le tavla ku means the talker, and may be used wherever any sumti may be used.

For example,

Example 2.38. 

mi

tavla

do

le tavla

[ku]


means the same as

Example 2.39. 

I talk to you about the talker


where the talker is presumably someone other than me, though not necessarily.

Similarly le sutra tavla ku is the fast talker, and le sutra te tavla ku is the fast subject of talk or the subject of fast talk. Which of these related meanings is understood will depend on the context in which the expression is used. The most plausible interpretation within the context will generally be assumed by a listener to be the intended one.

In many cases the word ku may be omitted. In particular, it is never necessary in a description at the end of a sentence, so:

Example 2.40. 

mi

tavla

do

le tavla

I

talk-to

you

about-the talker


means exactly the same thing as Example 2.38.

There is a problem when we want to say The fast one is talking. The obvious translation le sutra tavla turns out to mean the fast talker, and has no selbri at all. To solve this problem we can use the word cu, which so far has always been optional, in front of the selbri.

The word cu has no meaning, and exists only to mark the beginning of the selbri within the bridi, separating it from a previous sumti. It comes before any other part of the selbri, including other cmavo like se or te. Thus:

Example 2.41. 

le sutra tavla

The fast talker


Example 2.42. 

le sutra

cu

tavla

The fast one

-

is talking.


Example 2.43. 

le sutra se tavla

The fast talked-to one


Example 2.44. 

le sutra

cu

se tavla

The fast one

-

is talked to.


Consider the following more complex example, with two description sumti.

Example 2.45. 

mi

[cu]

tavla

le vecnu

[ku]

le blari'o

[ku]

I

-

talk-to

the seller

-

about the blue-green-thing.

-


The sumti le vecnu contains the selbri vecnu, which has the seller in the x1 place, and uses it in this sentence to describe a particular seller that the speaker has in mind (one that he or she probably expects the listener will also know about). Similarly, the speaker has a particular blue-green thing in mind, which is described using le to mark blari'o, a selbri whose first sumti is something blue-green.

It is safe to omit both occurrences of ku in Example 2.45, and it is also safe to omit the cu.

2.11. Examples of brivla

The simplest form of selbri is an individual word. A word which may by itself express a selbri relation is called a brivla. The three types of brivla are gismu (root words), lujvo (compounds), and fu'ivla (borrowings from other languages). All have identical grammatical uses. So far, most of our selbri have been gismu or tanru built from gismu.

gismu:

Example 2.46. 

mi

[cu]

klama

ti

zo'e

zo'e

ta

Go-er

-

goes

destination

origin

route

means.

I go here (to this) using that means (from somewhere via some route).


lujvo:

Example 2.47. 

ta

[cu]

blari'o

That

-

is-blue-green.


fu'ivla:

Example 2.48. 

ti

[cu]

djarspageti

This

-

is-spaghetti.


Some cmavo may also serve as selbri, acting as variables that stand for another selbri. The most commonly used of these is go'i, which represents the main bridi of the previous Lojban sentence, with any new sumti or other sentence features being expressed replacing the previously expressed ones. Thus, in this context:

Example 2.49. 

ta

[cu]

go'i

That

-

too/same-as-last selbri.

That (is spaghetti), too.


2.12. The sumti di'u and la'e di'u

In English, I might say The dog is beautiful, and you might reply This pleases me. How do you know what this refers to? Lojban uses different expressions to convey the possible meanings of the English:

Example 2.50. 

le gerku

[ku]

cu

melbi

The dog is beautiful.


The following three sentences all might translate as This pleases me.

Example 2.51. 

ti

[cu]

pluka

mi

This (the dog) pleases me.


Example 2.52. 

di'u

[cu]

pluka

mi

This (the last sentence) pleases me (perhaps because it is grammatical or sounds nice).


Example 2.53. 

la'e di'u

[cu]

pluka

mi

This (the meaning of the last sentence; i.e. that the dog is beautiful) pleases me.


Example 2.53 uses one sumti to point to or refer to another by inference. It is common to write la'edi'u as a single word; it is used more often than di'u by itself.

2.13. Possession

Possession refers to the concept of specifying an object by saying who it belongs to (or with). A full explanation of Lojban possession is given in Chapter 8. A simple means of expressing possession, however, is to place a sumti representing the possessor of an object within the description sumti that refers to the object: specifically, between the le and the selbri of the description:

Example 2.54. 

le mi gerku

cu

sutra

The of-me dog

-

is fast.

My dog is fast.


In Lojban, possession doesn't necessarily mean ownership: one may possess a chair simply by sitting on it, even though it actually belongs to someone else. English uses possession casually in the same way, but also uses it to refer to actual ownership or even more intimate relationships: my arm doesn't mean some arm I own but rather the arm that is part of my body. Lojban has methods of specifying all these different kinds of possession precisely and easily.

2.14. Vocatives and commands

You may call someone's attention to the fact that you are addressing them by using doi followed by their name. The sentence

Example 2.55. 

doi djan.


means Oh, John, I'm talking to you. It also has the effect of setting the value of do; do now refers to John until it is changed in some way in the conversation. Note that Example 2.55 is not a bridi, but it is a legitimate Lojban sentence nevertheless; it is known as a vocative phrase.

Other cmavo can be used instead of doi in a vocative phrase, with a different significance. For example, the cmavo coi means hello and co'o means good-bye. Either word may stand alone, they may follow one another, or either may be followed by a pause and a name. (Vocative phrases with doi do not need a pause before the name.)

Example 2.56. 

coi. djan.
Hello, John.

Example 2.57. 

co'o. djan.
Good-bye, John.

Commands are expressed in Lojban by a simple variation of the main bridi structure. If you say

Example 2.58. 

do

tavla

You

are-talking.


you are simply making a statement of fact. In order to issue a command in Lojban, substitute the word ko for do. The bridi

Example 2.59. 

ko

tavla


instructs the listener to do whatever is necessary to make Example 2.58 true; it means Talk! Other examples:

Example 2.60. 

ko

sutra

Be fast!


The ko need not be in the x1 place, but rather can occur anywhere a sumti is allowed, leading to possible Lojban commands that are very unlike English commands:

Example 2.61. 

mi

tavla

ko

Be talked to by me.

Let me talk to you.


The cmavo ko can fill any appropriate sumti place, and can be used as often as is appropriate for the selbri:

Example 2.62. 

ko

kurji

ko


and

Example 2.63. 

ko

ko

kurji


both mean You take care of you and Be taken care of by you, or to put it colloquially, Take care of yourself.

2.15. Questions

There are many kinds of questions in Lojban: full explanations appear in Section 19.5 and in various other chapters throughout the book. In this chapter, we will introduce three kinds: sumti questions, selbri questions, and yes/no questions.

The cmavo ma is used to create a sumti question: it indicates that the speaker wishes to know the sumti which should be placed at the location of the ma to make the bridi true. It can be translated as Who? or What? in most cases, but also serves for When?, Where?, and Why? when used in sumti places that express time, location, or cause. For example:

Example 2.64. 

ma

tavla

do

mi

Who?

talks

to-you

about-me.

Who is talking to you about me?


The listener can reply by simply stating a sumti:

Example 2.65. 

la djan.

John (is talking to you about me).


Like ko, ma can occur in any position where a sumti is allowed, not just in the first position:

Example 2.66. 

do

[cu]

tavla

ma

You

-

talk

to what/whom?


A ma can also appear in multiple sumti positions in one sentence, in effect asking several questions at once.

Example 2.67. 

ma

[cu]

tavla

ma

What/Who

-

talks

to what/whom?


The two separate ma positions ask two separate questions, and can therefore be answered with different values in each sumti place.

The cmavo mo is the selbri analogue of ma. It asks the respondent to provide a selbri that would be a true relation if inserted in place of the mo:

Example 2.68. 

do

[cu]

mo

You

-

are-what/do-what?


A mo may be used anywhere a brivla or other selbri might. Keep this in mind for later examples. Unfortunately, by itself, mo is a very non-specific question. The response to the question in Example 2.68 could be:

Example 2.69. 

mi

[cu]

melbi

I am beautiful.


or:

Example 2.70. 

mi

[cu]

tavla

I talk.


Clearly, mo requires some cooperation between the speaker and the respondent to ensure that the right question is being answered. If context doesn't make the question specific enough, the speaker must ask the question more specifically using a more complex construction such as a tanru (see Section 2.9).

It is perfectly permissible for the respondent to fill in other unspecified places in responding to a mo question. Thus, the respondent in Example 2.70 could have also specified an audience, a topic, and/or a language in the response.

Finally, we must consider questions that can be answered Yes or No, such as

Example 2.71. 

Are you talking to me?


Like all yes-or-no questions in English, Example 2.71 may be reformulated as

Example 2.72. 

Is it true that you are talking to me?


In Lojban we have a word that asks precisely that question in precisely the same way. The cmavo xu, when placed in front of a bridi, asks whether that bridi is true as stated. So

Example 2.73. 

xu

do

tavla

mi

Is-it-true-that

you

are-talking

to-me?


is the Lojban translation of Example 2.71.

The answer Yes may be given by simply restating the bridi without the xu question word. Lojban has a shorthand for doing this with the word go'i, mentioned in Section 2.11. Instead of a negative answer, the bridi may be restated in such a way as to make it true. If this can be done by substituting sumti, it may be done with go'i as well. For example:

Example 2.74. 

xu

do

kanro

Are you healthy?


can be answered with

Example 2.75. 

mi

kanro

I am healthy.


or

Example 2.76. 

go'i

I am healthy.


(Note that do to the questioner is mi to the respondent.)

or

Example 2.77. 

le tavla

cu

kanro

The talker is healthy.


or

Example 2.78. 

le tavla

cu

go'i

The talker is healthy.


A general negative answer may be given by na go'i. na may be placed before any selbri (but after the cu). It is equivalent to stating It is not true that ... before the bridi. It does not imply that anything else is true or untrue, only that that specific bridi is not true. More details on negative statements are available in Chapter 15.

2.16. Indicators

Different cultures express emotions and attitudes with a variety of intonations and gestures that are not usually included in written language. Some of these are available in some languages as interjections (i.e. Aha!, Oh no!, Ouch!, Aahh!, etc.), but they vary greatly from culture to culture.

Lojban has a group of cmavo known as attitudinal indicators which specifically covers this type of commentary on spoken statements. They are both written and spoken, but require no specific intonation or gestures. Grammatically they are very simple: one or more attitudinals at the beginning of a bridi apply to the entire bridi; anywhere else in the bridi they apply to the word immediately to the left. For example:

Example 2.79. 

.ie

mi

[cu]

klama

Agreement!

I

-

go.

Yep! I'll go.


Example 2.80. 

.ei

mi

[cu]

klama

Obligation!

I

-

go.

I should go.


Example 2.81. 

mi

[cu]

klama

le melbi

I

-

go

to-the beautiful-thing

.ui

[ku]

and I am happy because it is the beautiful thing I'm going to

-


Not all indicators indicate attitudes. Discursives, another group of cmavo with the same grammatical rules as attitudinal indicators, allow free expression of certain kinds of commentary about the main utterances. Using discursives allows a clear separation of these so-called metalinguistic features from the underlying statements and logical structure. By comparison, the English words but and also, which discursively indicate contrast or an added weight of example, are logically equivalent to and, which does not have a discursive content. The average English-speaker does not think about, and may not even realize, the paradoxical idea that but basically means and.

Example 2.82. 

mi

[cu]

klama

.i

do

[cu]

stali

I

-

go.

You

-

stay.


Example 2.83. 

mi

[cu]

klama

.i

ji'a

do

[cu]

stali

I

-

go.

In addition,

you

-

stay.

added weight


Example 2.84. 

mi

[cu]

klama

.i

ku'i

do

[cu]

stali

I

-

go.

However,

you

-

stay.

contrast


Another group of indicators are called evidentials. Evidentials show the speaker's relationship to the statement, specifically how the speaker came to make the statement. These include za'a (I directly observe the relationship), pe'i (I believe that the relationship holds), ru'a (I postulate the relationship), and others. Many American Indian languages use this kind of words.

Example 2.85. 

pe'i

do

[cu]

melbi

I opine!

You

-

are beautiful.


Example 2.86. 

za'a

do

[cu]

melbi

I directly observe!

You

-

are beautiful.


2.17. Tenses

In English, every verb is tagged for the grammatical category called tense: past, present, or future. The sentence

Example 2.87. 

John went to the store


necessarily happens at some time in the past, whereas

Example 2.88. 

John is going to the store


is necessarily happening right now.

The Lojban sentence

Example 2.89. 

la djan.

[cu]

klama

le zarci

John

-

goes/went/will-go

to-the store


serves as a translation of either Example 2.87 or Example 2.88, and of many other possible English sentences as well. It is not marked for tense, and can refer to an event in the past, the present or the future. This rule does not mean that Lojban has no way of representing the time of an event. A close translation of Example 2.87 would be:

Example 2.90. 

la djan.

pu

klama

le zarci

John

[past]

goes

to-the store


where the tag pu forces the sentence to refer to a time in the past. Similarly,

Example 2.91. 

la djan.

ca

klama

le zarci

John

[present]

goes

to-the store


necessarily refers to the present, because of the tag ca. Tags used in this way always appear at the very beginning of the selbri, just after the cu, and they may make a cu unnecessary, since tags cannot be absorbed into tanru. Such tags serve as an equivalent to English tenses and adverbs. In Lojban, tense information is completely optional. If unspecified, the appropriate tense is picked up from context.

Lojban also extends the notion of tense to refer not only to time but to space. The following example uses the tag vu to specify that the event it describes happens far away from the speaker:

Example 2.92. 

do

vu vecnu

zo'e

You

yonder sell

something-unspecified.


In addition, tense tags (either for time or space) can be prefixed to the selbri of a description, producing a tensed sumti:

Example 2.93. 

le pu bajra

[ku]

cu

tavla

The earlier/former/past runner

-

-

talked/talks.


(Since Lojban tense is optional, we don't know when he or she talks.)

Tensed sumti with space tags correspond roughly to the English use of this or that as adjectives, as in the following example, which uses the tag vi meaning nearby:

Example 2.94. 

le vi bajra

[ku]

cu

tavla

The nearby runner

-

-

talks.

This runner talks.


Do not confuse the use of vi in Example 2.94 with the cmavo ti, which also means this, but in the sense of this thing.

Furthermore, a tense tag can appear both on the selbri and within a description, as in the following example (where ba is the tag for future time):

Example 2.95. 

le vi tavla

[ku]

cu

ba klama

The here talker

-

-

[future] goes.

The talker who is here will go.

This talker will go.


2.18. Lojban grammatical terms

Here is a review of the Lojban grammatical terms used in this chapter, plus some others used throughout this book. Only terms that are themselves Lojban words are included: there are of course many expressions like indicator in Chapter 16 that are not explained here. See the Index for further help with these.

bridi predication; the basic unit of Lojban expression; the main kind of Lojban sentence; a claim that some objects stand in some relationship, or that some single object has some property.
sumti argument; words identifying something which stands in a specified relationship to something else, or which has a specified property. See Chapter 6.
selbri logical predicate; the core of a bridi; the word or words specifying the relationship between the objects referred to by the sumti. See Chapter 5.
cmavo one of the Lojban parts of speech; a short word; a structural word; a word used for its grammatical function.
brivla one of the Lojban parts of speech; a content word; a predicate word; can function as a selbri; is a gismu, a lujvo, or a fu'ivla. See Chapter 4.
gismu a root word; a kind of brivla; has associated rafsi. See Chapter 4.
lujvo a compound word; a kind of brivla; may or may not appear in a dictionary; does not have associated rafsi. See Chapter 4 and Chapter 12.
fu'ivla a borrowed word; a kind of brivla; may or may not appear in a dictionary; copied in a modified form from some non-Lojban language; usually refers to some aspect of culture or the natural world; does not have associated rafsi. See Chapter 4.
rafsi a word fragment; one or more is associated with each gismu; can be assembled according to rules in order to make lujvo; not a valid word by itself. See Chapter 4.
tanru a group of two or more brivla, possibly with associated cmavo, that form a selbri; always divisible into two parts, with the first part modifying the meaning of the second part (which is taken to be basic). See Chapter 5.
selma'o a group of cmavo that have the same grammatical use (can appear interchangeably in sentences, as far as the grammar is concerned) but differ in meaning or other usage. See Chapter 20.